A4.32 Fixed or Built-in Seating and Tables.
A4.32.4 Height of Tables or Counters. Different types of work require different table or counter heights for comfort and optimal performance. Light detailed work such as writing requires a table or counter close to elbow height for a standing person. Heavy manual work such as rolling dough requires a counter or table height about 10 in (255 mm) below elbow height for a standing person. This principle of high/low table or counter heights also applies for seated persons; however, the limiting condition for seated manual work is clearance under the table or counter.
Table A1 shows convenient counter heights for seated persons. The great variety of heights for comfort and optimal performance indicates a need for alternatives or a compromise in height if people who stand and people who sit will be using the same counter area.
|
Conditions of Use |
Short Women in mm | Tall Men in mm |
|
Seated in a wheelchair: Manual work- Desk or removable armrests |
26 660 | 30 760 |
|
Fixed, full-size armrests2 |
323 815 | 323 815 |
|
Light, detailed work: Desk or removable armrests |
29 735 | 34 865 |
|
Fixed, full-size armrests2 |
323 815 | 34 865 |
|
Seated in a 16 in (405 mm) high chair: Manual work |
26 660 | 27 685 |
|
Light, detailed work |
28 710 | 31 785 |
1All dimensions are based on a work-surface thickness of 1 1/2 in (38 mm) and a clearance of 1 1/2 in (38 mm) between legs and the underside of a work surface.
2This type of wheelchair arm does not interfere with the positioning of a wheelchair under a work surface.
3This dimension is limited by the height of the armrests: a lower height would be preferable. Some people in this group prefer lower work surfaces, which require positioning the wheelchair back from the edge of the counter.
User Comments/Questions
Add Comment/Question