Hello. Please sign in!

Solutions

Documents

Resources

2012 Texas Accessibility Standards (TAS) Pocket Guide

Note: This document or portion of document references a state or local code that aligns with the 2010 ADA Standards requirements.

404.2.6 Doors in Series and Gates in Series.

The distance between two hinged or pivoted doors in series and gates in series shall be 48 inches (1220 mm) minimum plus the width of doors or gates swinging into the space.

Figure (a) shows two doors in series which swing in the same direction. Space between the doors must be at least 48 inches (1220 mm) minimum plus the width of the in-swinging door.

(a)

Figure (b) shows two doors in series which swing away from the space between the doors. The space separating the doors must be at least 48 inches (1220 mm) long.

(b)

Figure (c) shows two doors in series which swing into the space between the doors. The space between the fully opened doors must be at least 48 inches (1220 mm) long.

(c)

Figure 404.2.6 Doors in Series and Gates in Series

Source: 2012 Texas Accessibility Standards (TAS) Pocket Guide by Texas Department of Licensing and Regulation - published 03/15/2012

Previous Next

Related Keywords

Related Section Numbers

User Comments/Questions

Add Comment/Question

[MORE INFO...]

*You must sign in to view [MORE INFO...]