2016 California Standards for Accessible Design Pocket Guide - Eff. Jan. 1, 2017
11B-209.2 Type.
Where provided, passenger drop-off and loading zones shall comply with Section 11B-209.2.
11B-209.2.1 Passenger drop-off and loading zones.
Passenger drop-off and loading zones, except those required to comply with Sections 11B-209.2.2 and 11B-209.2.3, shall provide at least one passenger drop-off and loading zone complying with Section 11B-503 in every continuous 100 linear feet (30480 mm) of drop-off and loading zone space, or fraction thereof.
[2010 ADAS] 209.2.1 Passenger Loading Zones. Passenger loading zones, except those required to comply with 209.2.2 and 209.2.3, shall provide at least one passenger loading zone complying with 503 in every continuous 100 linear feet (30 m) of loading zone space, or fraction thereof.
ETA Editor’s Note:
The CBC includes passenger drop-off. Therefore, the CBC is more inclusive.
11B-209.2.2 Bus loading zones.
In bus loading zones restricted to use by designated or specified public transportation vehicles, each bus bay, bus stop, or other area designated for lift or ramp deployment shall comply with Section 11B-810.2.
[2010 ADAS] Advisory 209.2.2 Bus Loading Zones. The terms "designated public transportation" and "specified public transportation" are defined by the Department of Transportation at 49 CFR 37.3 in regulations implementing the Americans with Disabilities Act. These terms refer to public transportation services provided by public or private entities, respectively. For example, designated public transportation vehicles include buses and vans operated by public transit agencies, while specified public transportation vehicles include tour and charter buses, taxis and limousines, and hotel shuttles operated by private entities.
11B-209.2.3 On-street bus stops.
On-street bus stops shall comply with Section 11B-810.2 to the maximum extent practicable.
User Comments/Questions
Add Comment/Question