11B-303.3 Beveled

Note: This document or portion of document references a state or local code that aligns with the 2010 ADA Standards requirements.

11B-303.3 Beveled.

Changes in level between ¼ inch (6.4 mm) high minimum and ½ inch (12.7 mm) high maximum shall be beveled with a slope not steeper than 1:2.

[2010 ADAS] Advisory 303.3 Beveled. A change in level of ½ inch (13 mm) is permitted to be ¼ inch (6.4 mm) vertical plus ¼ inch (6.4 mm) beveled. However, in no case may the combined change in level exceed ½ inch (13 mm). Changes in level exceeding ½ inch (13 mm) must comply with 405 (Ramps) or 406 (Curb Ramps).

Elevation drawing of a change in level 1/4 to 2 inches high that is beveled with a slope of 1:2.

FIGURE 11B-303.3 BEVELED CHANGE IN LEVEL

[MORE INFO...]

*You must sign in to view [MORE INFO...]

Solutions

Documents

Resources

2016 California Standards for Accessible Design Pocket Guide - Eff. Jan. 1, 2017

11B-303.3 Beveled.

Related Keywords

Related Section Numbers

User Comments/Questions

[MORE INFO...]