11B-505.7 Cross section

Note: This document or portion of document references a state or local code that aligns with the 2010 ADA Standards requirements.

11B-505.7 Cross section.

Handrail gripping surfaces shall have a cross section complying with Section 11B-505.7.1 or 11B-505.7.2.

11B-505.7.1 Circular cross section.

Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum.

11B-505.7.2 Non-circular cross sections.

Handrail gripping surfaces with a non-circular cross section shall have a perimeter dimension of 4 inches (102 mm) minimum and 6¼ inches (159 mm) maximum, and a cross-section dimension of 2¼ inches (57 mm) maximum.

Figure (a) shows a handrail with an approximately square cross section and figure (b) shows an elliptical cross section. The largest cross section dimension is 2 1/4 inches maximum. The perimeter dimension must be 4 to 6 1/4 inches.

FIGURE 11B-505.7.2
HANDRAIL NON-CIRCULAR CROSS SECTION

[MORE INFO...]

*You must sign in to view [MORE INFO...]

Solutions

Documents

Resources

2016 California Standards for Accessible Design Pocket Guide - Eff. Jan. 1, 2017