11B-608.3.3 Alternate roll-in type shower compartments

Note: This document or portion of document references a state or local code that aligns with the 2010 ADA Standards requirements.

11B-608.3.3 Alternate roll-in type shower compartments.

In alternate roll-in type shower compartments, grab bars shall be provided on the back wall and the side wall farthest from the compartment entry. Grab bars shall not be provided above the seat. Grab bars shall be installed 6 inches (152 mm) maximum from adjacent walls.

This figure shows an alternate roll-in shower with a seat. A grab bar extends on the wall opposite the seat and is 6 inches maximum from adjacent walls. Another grab bar is mounted on the side wall adjacent to the seat; this grab bar does not extend over the seat and is 6 inches maximum from the back wall.

FIGURE 11B-608.3.3 GRAB BARS FOR ALTERNATE ROLL-IN TYPE SHOWERS

[MORE INFO...]

*You must sign in to view [MORE INFO...]

Solutions

Documents

Resources

2022 California Standards for Accessible Design Guide (effective January 1, 2023)

11B-608.3.3 Alternate roll-in type shower compartments.

Related Keywords

Related Section Numbers

User Comments/Questions

[MORE INFO...]