4.5.2 CHANGES IN LEVEL.
Changes in level up to 1/4 in (6 mm) may be vertical and without edge treatment (see Fig. 7(c)). Changes in level between 1/4 in and 1/2 in (6 mm and 13 mm) shall be beveled with a slope no greater than 1:2 (see Fig. 7(d)). Changes in level greater than 1/2 in (13 mm) shall be accomplished by means of a ramp that complies with 4.7 or 4.8.
Figure 7(c) Changes in Level
Figure 7(d) Changes in Level
User Comments/Questions
Add Comment/Question