2013 California Standards for Accessible Design Pocket Guide
11B-405.9.2 Curb or barrier.
A curb, 2 inches (51 mm) high minimum, or barrier shall be provided that prevents the passage of a 4 inch (102 mm) diameter sphere, where any portion of the sphere is within 4 inches (102 mm) of the finish floor or ground surface. To prevent wheel entrapment, the curb or barrier shall provide a continuous and uninterrupted barrier along the length of the ramp.
CURB OR BARRIER EDGE PROTECTION
ETA Editor's Note
2013 CBC requires either a curb or a barrier for edge protection at ramps, and does not recognize the extended floor or ground surface also permitted by 2010 ADAS.
User Comments/Questions
Add Comment/Question