2013 California Standards for Accessible Design Pocket Guide

11B-608.2.2 Standard roll-in type shower compartments.

Standard roll-in type shower compartments shall be 30 inches (762 mm) wide minimum by 60 inches (1524 mm) deep minimum clear inside dimensions measured at center points of opposing sides with a full opening width on the long side.

[2010 ADAS] 608.2.2 Standard Roll-In Type Shower Compartments.  Standard roll-in type shower compartments shall be 30 inches (760 mm) wide minimum by 60 inches (1525 mm) deep minimum clear inside dimensions measured at center points of opposing sides and shall have a 60 inches (1525 mm) wide minimum entry on the face of the shower compartment.

11B-608.2.2.1 Clearance.

A 36 inch (914 mm) wide minimum by 60 inch (1524 mm) long minimum clearance shall be provided adjacent to the open face of the shower compartment.

[2010 ADAS] 608.2.2.1 Clearance.  A 30 inch (760 mm) wide minimum by 60 inch (1525 mm) long minimum clearance shall be provided adjacent to the open face of the shower compartment.

Exception:  Reserved.

[2010 ADAS] EXCEPTION:  A lavatory complying with 606 shall be permitted on one 30 inch (760 mm) wide minimum side of the clearance provided that it is not on the side of the clearance adjacent to the controls or, where provided, not on the side of the clearance adjacent to the shower seat.

FIGURE 11B-608.2.2 ‡‡

STANDARD ROLL-IN TYPE SHOWER COMPARTMENT SIZE AND CLEARANCE