Hello. Please sign in!

Solutions

Documents

Resources

2013 California Standards for Accessible Design Pocket Guide

Note: This document or portion of document references a state or local code that is stricter than the 2010 ADA Standards requires.

11B-608.2.2.1 Clearance.

A 36 inch (914 mm) wide minimum by 60 inch (1524 mm) long minimum clearance shall be provided adjacent to the open face of the shower compartment.

[2010 ADAS] 608.2.2.1 Clearance.  A 30 inch (760 mm) wide minimum by 60 inch (1525 mm) long minimum clearance shall be provided adjacent to the open face of the shower compartment.

Exception:  Reserved.

[2010 ADAS] EXCEPTION:  A lavatory complying with 606 shall be permitted on one 30 inch (760 mm) wide minimum side of the clearance provided that it is not on the side of the clearance adjacent to the controls or, where provided, not on the side of the clearance adjacent to the shower seat.

A plan view shows the shower compartment is 30 inches minimum by 60 inches minimum with a 60 inch wide entry on the face of the compartment. A clear floor space 36 inches side is provided adjacent to the open face of the compartment. A seat is shown on one end.

FIGURE 11B-608.2.2 ‡‡

STANDARD ROLL-IN TYPE SHOWER COMPARTMENT SIZE AND CLEARANCE

Source: 2013 California Standards for Accessible Design Pocket Guide by California Building Standards Commission (edited by Evan Terry Associates) - published 01/01/2015

Previous Next

Related Keywords

Related Section Numbers

User Comments/Questions

Add Comment/Question

[MORE INFO...]

*You must sign in to view [MORE INFO...]