11B-411.2.1.2.3 Accessibility function button

Login
Signup

Solutions

Documents

Resources

Note: This document or portion of document references a state or local requirement that is NOT required by the 2010 ADA Standards.

11B-411.2.1.2.3 Accessibility function button.

The accessibility function button shall be identified by the International Symbol of Accessibility and a raised indication. The International Symbol of Accessibility shall comply with Section 11B-703.7.2.1, and shall be 5/8 inch (15.9 mm) minimum in height. The indication shall be three raised dots. Each dot shall have a base diameter of 0.059 inch (1.5 mm) minimum and 0.063 inch (1.6 mm) maximum and a height of 0.025 inch (0.6 mm) minimum and 0.037 inch (0.9 mm) maximum. The dots shall be spaced ¼ inch (6.4 mm), measured center to center, in the form of an equilateral triangle with a vertex pointing up. The accessibility function button shall not be provided with a key repeat function.

International Symbol of Accessibility shown to measure 5/8" high, accompanied with three dots in an equilateral triangular shape with each dot 1/4" apart, serving as raised indication of the International Symbol of Accessibility

Visual and Raised Information

International Symbol of Accessibility shown to measure 5/8" high, accompanied with three dots in an equilateral triangular shape with each dot 1/4" apart, serving as raised indication of the International Symbol of Accessibility

Visual and Raised Information

FIGURE 11B-411.2.1.2.3 DESTINATION-ORIENTED ELEVATOR ACCESSIBILITY FUNCTION BUTTON INDICATION

[MORE INFO...]

*You must sign in to view [MORE INFO...]