Product Description
When you need to replace an existing notched-style lock and get up to code on ADA accessibility the Falcon RU/RW Series is a perfect fit. Designed specifically for retrofitting older and historical buildings, this unique lock combines old-fashioned styling with modern strength, security and convenience.
Falcon RU/RW Series locks have an interchangeable core that can be removed for quick, easy re-keying. Our interchangeable cores are compatible with SFIC products from other manufacturers. And they’re backed by one of the best names in the business.
Retrofit Locks Features and Benefits
The RU Series from Falcon is designed to retrofit existing unit locks manufactured by Falcon (Weiser), Corbin Russwin and Yale. It exceeds ANSI Grade 1 specifications and is UL/ULC listed. Incorporates Falcon’s vandal resistant Pressure Release™ trim to prevent damage to internal mechanism. Installs with minimal rework to existing doors while preserving door and frame for cost effective project planning. Falcon’s RU Series satisfies all ADA easy access requirements.
Features and Benefits
-
Vandal resistant PressureRelease™ outside lever disengages when locked to prevent damage to internal mechanism.
-
3 lever designs.
-
Complements Falcon’s ”Family” of lever designs.
-
”Power Spring™” in rose trim prevents lever sag.
-
12 commercial lock functions.
-
6 standard finishes: 605, 606, 612, 613, 625, 626.
-
No exposed mounting screws.
-
Solid bar stock deadlocking feature prevents latch binding and lock failure due to poor door alignment.
-
Exceeds 800,000 cycle ANSI Grade 1 requirement.
-
Meets or exceeds all other ANSI A156.2 rigorous Grade 1 specifications for key-in-lever products.
-
Preserves existing facility doors and frames.
-
Preserves original architectural design without adapter plate or add-ons.
-
Easy installation with minimal door modifications.
-
Features a 4” square rose which covers existing mounting holes, most paint lines and required door rework.
-
Complies with ADA easy access requirements.
-
UL/ULC listed for 3 Hour A Label doors.
-
Strikes available to match existing frame preparation.
-
Reuse existing facility cylinders and key system.
-
Non-handed chassis and field reversible trim and latch bolt for easy stocking and lower inventory cost.
-
Key removable outside lever for easy cylinder replacement.
-
Outside lever secured by a spring-loaded retainer. Retainer cannot be depressed when locks have been locked. Inside lever secured by a set screw. Levers have heavy-duty steel individual return springs in order to prevent lever sag.
Product Details
| CSI Division: | 08 71 00 |
|---|---|
| CSI Division Title: | Door Hardware |
| Product Cut Sheet/Specs/Demo: | http://us.allegion.com/IRSTDocs/InstallInstructions/106830.pdf |
Related Keywords
Related Section Numbers
- 2010 ADA Standards for Accessible Design Pocket Guide, (1)
- 28 CFR Part 36 Nondiscrimination on the Basis of Disability by Public Accommodations and in Commercial Facilities (2010 ADA Title III Regulations with amendments issued through Dec. 2016), (1)
- 1991 ADA Standards for Accessible Design, (2)
- 2012 Florida Accessibility Code for Building Construction Pocket Guide, (1)
- 2012 Texas Accessibility Standards (TAS) Pocket Guide, (1)
- 2013 California Standards for Accessible Design Pocket Guide, (1)
- 28 CFR Part 36 Nondiscrimination on the Basis of Disability by Public Accommodations and in Commercial Facilities (1991 ADA Title III Regulations), (1)
- ADAAG Manual, (1)
- ABA Accessibility Standard for GSA Facilities Pocket Guide, (1)