Product Description
The most energy-effecient, environmentally friendly hand dryer on the planet.
Model No. |
Cover Finish |
Mounting |
Time Cycle |
Dryer Type |
---|---|---|---|---|
XL-BW-ECO |
White Thermoset (BMC) |
Surface |
Automatic |
Hand Dryer |
XL-W-ECO |
White |
Surface |
Automatic |
Hand Dryer |
XL-GR-ECO |
Graphite |
Surface |
Automatic |
Hand Dryer |
XL-SP-ECO** |
Custom Special Paint |
Surface |
Automatic |
Hand Dryer |
XL-SI-ECO* |
Custom Special Image |
Surface |
Automatic |
Hand Dryer |
XL-C-ECO |
Chrome |
Surface |
Automatic |
Hand Dryer |
XL-SB-ECO |
Brushed Stainless Steel |
Surface |
Automatic |
Hand Dryer |
*Note: Exclusive digital image technology allows for the addition of Company, School or Team logos with any color, design or a 'Green message'. ** Special Paint powder coated covers come in many colors and textures.
Features
-
New No Heat Technology
-
12 Second Dry Time*
-
500 Watts
-
Adjustable Speed and Sound Control
-
Can Install Multiple XLERATOReco Units On One Circuit
-
95% Cost Savings Vs. Paper Towels
-
5-Year Limited Warranty
-
Made In USA Certified®
-
GREENSPEC® Listed and Helps Qualify for several LEED®credits
-
Virtually Maintenance Free
Specifications
Dimensions: |
Width 11 3/4" (298 mm) |
Weight: |
XL-BW-ECO: 15 lbs. (6.8 kgs.) |
Construction
-
All covers will be fastened to a base plate by two chrome plated tamper-proof bolts. Cover shall be one of the following:
Die-cast zinc alloy - One-piece, heavy-duty, rib-reinforced, lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically applied epoxy paint.
Bulk Molding Compound (BMC) – White reinforced thermoset resin.
Stainless Steel – with a brushed finish.
Special Image – Digital image applied to die-cast or stainless steel covers using patented Kolorfusion Sublimation Decoration process. -
Base plate shall be equipped with (3) 7/8" (22 mm) diameter holes, the bottom one is suitable for use with surface conduit.
-
All internal parts shall be coated according to Underwriters' Laboratories, Inc. requirements.
-
Entire mechanism shall be internally grounded.
-
Options
HEPA Filtration System: Filters 99.97% of bacteria at 0.3 microns from the air stream. 1.1 Noise Reduction Nozzle: Lowers decibel level 9 dB by reducing air deflection noise but increases dry time by approximately 3 seconds. -
Accessories (optional)
Microban® Antimicrobial Wall Guards: 89W (White), 89B (Black), 89S (Stainless)
XChanger Paper Towel Retrofit Kit: 40550, 40551 (ADA Height)
ADA Recess Kit: 40502
Mechanism
-
Motor shall be a thermally protected, series commutated, through-flow discharge vacuum motor/blower (5/8 hp / 20,000 rpm) which provides air velocity of up to 19,000 LFM (linear feet per minute) at the air outlet and 16,000 LFM at the hands (4 inches [102 mm] below air outlet).
-
Control assembly is activated by an infrared optical sensor located next to the air outlet. The dryer shall operate as long as hands are under the air outlet. Control includes a speed and sound control mechanism and a filter sensor which is activated should the filter become clogged. There is a 35-second lockout feature if hands are not removed. Sensor equipped with externally visible Red LED light that can flash error codes to assist in troubleshooting.
Limited Warranty
The dryer shall be guaranteed to be free from defects for a period of five (5) years. Warranty shall include labor performed at factory as well as the repair or exchange of defective parts, at manufacturer's option.
Quantity Recommendations
One dryer for every two washbasins is sufficient for most applications. If restroom traffic is unusually heavy, we suggest one dryer per washbasin in small installations and two dryers for every three washbasins in larger installations. When a 54" washfountain is used, we suggest four to five dryers.
Hand Drying Procedure
Please contact Excel at (888) 998-7704 or 413-525-4531 for Excel's recommended hand drying procedure.
Electrical
VOLTS |
AMPS |
WATTS |
HERTZ |
* |
---|---|---|---|---|
110-120V |
4.3-4.5A |
460-530W |
50/60 Hz |
|
208-277V |
2-2.2A |
425-500W |
50/60 Hz |
|
230V |
2.2A |
500W |
50 Hz |
|
Suggested Mounting Heights
From Floor to Bottom of Dryer |
|
---|---|
Men |
45" (114 cm) |
Women |
43" (109 cm) |
Teenagers |
41" (104 cm) |
Children |
35" (89 cm) |
Accessible |
37" (94 cm) |
|
|
XLERATOReco® Resources
Product Details
CSI Division: | 10 28 13.13 |
---|---|
CSI Division Title: | Commercial Toilet Accessories |
Manufacturer's Brochure: | http://www.exceldryer.com/pdfs/XLERATORecoSellSheet.pdf |
Product Cut Sheet/Specs/Demo: | http://www.exceldryer.com/pdfs/XLERATORecoTechSheet.pdf |
Related Keywords
Related Section Numbers
- 2010 ADA Standards for Accessible Design Pocket Guide, (1)
- 1991 ADA Standards for Accessible Design, (2)
- 2012 Florida Accessibility Code for Building Construction Pocket Guide, (1)
- 2012 Texas Accessibility Standards (TAS) Pocket Guide, (1)
- 2016 California Standards for Accessible Design Pocket Guide - Eff. Jan. 1, 2017, (1)
- 2013 California Standards for Accessible Design Pocket Guide, (1)
- ABA Accessibility Standard for GSA Facilities Pocket Guide, (1)
Excel Dryer, Inc. XLERATOReco® Surface Mount Hand Dryer
View: | 2D: front elevation |
---|---|
File type: | DWG |
Excel Dryer, Inc. XLERATOReco® Hand Dryer XChanger Kit BIM File
View: | 3D object |
---|---|
File type: | rfa |
Excel Dryer, Inc. XLERATOReco® Hand Dryer Wall Guard
View: | 2D: front elevation |
---|---|
File type: | DWG |
Excel Dryer, Inc. XLERATOReco® Hand Dryer XChanger Kit
View: | 2D: front elevation |
---|---|
File type: | DWG |
Excel Dryer, Inc. XLERATOReco® Hand Dryer Unit
View: | 3D object |
---|---|
File type: | rfa |
Excel Dryer, Inc. XLERATOReco® Hand Dryer Wall Guard BIM File
View: | 3D object |
---|---|
File type: | rfa |
Excel Dryer, Inc. XLERATOReco® Hand Dryer ADA Compliant Recess Kit
View: | 2D: front elevation |
---|---|
File type: | DWG |
Excel Dryer, Inc. XLERATOReco® Hand Dryer Recess Mounting Kit
View: | 3D object |
---|---|
File type: | rfa |
Excel Dryer, Inc. XLERATOReco® Hand Dryer XChanger Kit ADA
View: | 2D: front elevation |
---|---|
File type: | DWG |