Norton Surface Mounted 5700 Series Low Energy Door Operator

The 5700 Series design is based on ease and simplicity. This unit installs in minutes rather than hours and consists of three basic components: inverter, motor and Norton's 1601 closer body. Quiet and dependable, the 5700 meets the requirements of the Americans with Disability Act (A.D.A.) and ANSI/BHMA A156.4. Available push- or pull- side mounting, this unit is perfect for applications that don't require special features but demands reliability.
 
Features & Functions:

• Ease of installation and setup
• Simple instructions
• Application versatility and ease of adjustment; push or pull side mounting units available
• Operates as mechanical surface closer during close cycles, when door is opened manually or if power is turned off; quiet operation
• Spring force provides the feel of a normal manual door closer; door can be opened manually if desired
• Norton® 1601/1601BF series door closer
• Non-Handed
• Unit Activation Options: wall switches, motion sensor, radio frequency device
• End-User On/Off Switch
• Hold Open options; 0-30 seconds (5 seconds minimum required for ADA and ANSI/BHMA A156.19)
• Obstruction Detection: motor stops if door is obstructed during an opening; door closes under manual spring force (not to exceed 15lbf)
• "Push and Close"; allows the operator to skip the hold open time when it is not necessary or required
• Adjustable door sensitivity
• Overload Safety Shut-Off - after two minutes of receiving a door activation signal, the inverter will time out and close the door; prevents motor/inverter damage
• Motor Start Delay for Locking Hardware - 0-5 second delay to allow locking hardware to release first
• Onboard power supply for accessories: 24VDC (1.1A)

Electrical Data:

• Power Input; 120 VAC, 60Hz
• Relay Output: SPDT
• Normally Open/Normally Closed (jumper) for electric strike function