Allegion Von Duprin 94/95 Series INPACT Recessed Exit Device

Product Website

Product Description

INPACT is fully integrated within a door and combines a clean, tasteful appearance with Von Duprin’s unrivaled standards of durability and performance. The design is compatible with hollow metal doors, including doors manufactured by Steelcraft®, part of the Allegion product line.

Features and Benefits

Design

The streamlined, extruded aluminum pushpad is uniquely designed to exhibit grace under pressure. Built to absorb shock, it takes the wear and tear of even the most demanding high-traffic areas. The sloped, die-cast metal endcaps provide added support, protecting the device and the door against the heaviest impact. The nonhanded configuration simplifies installation and gives superior flexibility in the field.

Construction
Compression springs are used throughout, and all internal components are coated with zinc dichromate to prevent corrosion. Latchbolts have a self-lubricating coating to reduce friction and wear. Concealed studs and through-bolts, from the inside, fasten the heavy-duty outside trim. Factory steel door prep makes installation simple and fast. Not available on wood doors.

Durability and Reliable Operation
Devices are tested in accordance to ANSI/BHMA A156.3 Grade 1 by a BHMA certified testing laboratory. INPACT has exceeded one million cycles.

Specifications 94/95 INPACT Concealed Vertical Rod Devices

Models: 9447 and 9547
Fire-Rated Models: 9447-F and 9547-F
Device Handing: Non-handed
Functions: See Trim Selection Chart on the Styles tab
Finishes: See Finishes Chart on the Styles tab
Styles: Smooth 94 Series and Grooved 95 Series
Pushpad: Extruded anodized aluminum
Endcaps: Die-cast aluminum, sloped design
Strikes: Standard 338 and 385A provided.
Latchbolt: 5/8" (16mm) throw. Top and bottom latching are standard. (Optional LBR is available, with no need for floor strike.)
Deadlocking Latchbolt: Standard
Dogging Feature: Hex key dogging
Door Sizes: 2'10" (864mm) to 4'0" (1219mm) width; 10'0" (3048mm) maximum height; 1 3/4" (44mm) thickness
Device Height: 4 1/2" (114mm)
Device Length: 30" (762mm)
Device Center Line to Finished Floor: 39 5/8" (1006mm)
Projection: 1 5/8" (41mm) neutral; 1 1/4" (32mm) depressed
Fasteners: Included for surface mounting to recessed door prep and through bolting to trim.
ANSI Grade: Certified to ANSI/BHMA A156.3 Grade 1. Tested at one million cycles.
Concealed Vertical Rods: Two-piece adjustable rods, door 6'8" (2032mm) to 8'4" (2540mm). Can be adjusted by removing the latchside endcap.
Optional Extension Rod: Adjustable for doors 8'4" (2540mm) to 10'0" (3048mm).

Specifications 94/95 INPACT Mortise Lock Devices

Models: 9475 and 9575
Fire-Rated Models: 9475-F and 9575-F
Device Handing: Non-handed
Functions: See Trim Selection Chart on the Styles tab
Finishes: See Finishes Chart on the Styles tab
Styles: Smooth 94 Series and Grooved 95 Series
Pushpad: Extruded anodized aluminum
Endcaps: Die-cast aluminum, sloped design
Strike: Standard 575
Latchbolt: 3/4" anti-friction, field reversible
Deadlocking Latchbolt: Standard
Mortise Lock Center Line to Finished Floor: 48 1/8" (1222mm)
Dogging Feature: Hex key dogging
Door Sizes: 2'10" (864mm) to 4'0" (1219mm) width; 10'0" (3048mm) maximum height; 1 3/4" (44mm) thickness
Device Height: 4 1/2" (114mm)
Device Length: 30" (762mm)
Device Center Line to Finished Floor: 39 5/8" (1006mm)
Projection: 1 5/8" (41mm) neutral; 1 1/4" (32mm) depressed
Fasteners: Included for surface mounting to recessed door prep and through bolting to trim.
ANSI Grade: Certified to ANSI/BHMA A156.3 Grade 1. Tested at one million cycles.