Product Description
User Reviews/Comments
Product Description
Willoughby Model No. DF-1015-96-HC:
Fixture shall be fabricated from 14 gauge, type 304 stainless steel. The construction shall be all-welded, with exposed stainless surfaces polished to a #4 satin finish. Standard equipment shall include: rectangular-shaped basin, 14 1/2" x 10" x 1" deep, stainless steel bubbler, fast drain with air vent and elbow waste (1 1/2" F.I.P.).
Cabinet interior shall be sound deadened with fi re-resistant material. Anchoring shall be by standard 4-point system: 1/2" threaded rods, nuts and washers shall be furnished for walls up to 8" thick. Unit shall require chase area for installation and maintenance.
-
ADA compliant
-
Rear mounted drinking fountain
Product Details
| CSI Division: | 22 47 13 |
|---|---|
| CSI Division Title: | Drinking Fountains |
| Product Cut Sheet/Specs/Demo: | http://www.willoughby-ind.com/PRODUCTS/SecurityFixtures/DrinkingFountains.aspx |
Related Keywords
Related Section Numbers
- 2010 ADA Standards for Accessible Design Pocket Guide, (2)
- 1991 ADA Standards for Accessible Design, (5)
- Uniform Federal Accessibility Standards (UFAS), (1)
- 2012 Florida Accessibility Code for Building Construction Pocket Guide, (2)
- 2012 Texas Accessibility Standards (TAS) Pocket Guide, (2)
- 2013 California Standards for Accessible Design Pocket Guide, (2)
- ADAAG Manual, (6)
- Guidance on the 2010 ADA Standards for Accessible Design, (1)
- 36 CFR Parts 1190 and 1191 ADA and ABA Accessibility Guidelines - Preamble (Discussion of Comments and Changes), (2)
- Title III Technical Assistance Manual (with 1994 supplement), (1)
- ABA Accessibility Standard for GSA Facilities Pocket Guide, (2)
- Elimination of Architectural Barriers - Administrative Rules of the TDLR, 16 Texas Administrative Code, Chapter 68, (1)
Add Comment/Question