Hello. Please sign in!

Solutions

Documents

Resources

2010 ADA Standards for Accessible Design Pocket Guide

404.2.4.1 Swinging Doors and Gates.

Swinging doors and gates shall have maneuvering clearances complying with Table 404.2.4.1.

Table 404.2.4.1 Maneuvering Clearances at Manual Swinging Doors and Gates
Type of Use Minimum Maneuvering Clearance
Approach Direction Door or Gate Side Perpendicular to Doorway Parallel to Doorway (beyond latch side unless noted)
From front Pull 60 inches (1525 mm) 18 inches (455 mm)
From front Push 48 inches (1220 mm) 0 inches (0 mm)1
From hinge side Pull 60 inches (1525 mm) 36 inches (915 mm)
From hinge side Pull 54 inches (1370 mm) 42 inches (1065 mm)
From hinge side Push 42 inches (1065 mm)2 22 inches (560 mm)3
From latch side Pull 48 inches (1220 mm)4 24 inches (610 mm)
From latch side Push 42 inches (1065 mm)4 24 inches (610 mm)

1. Add 12 inches (305 mm) if closer and latch are provided.
2. Add 6 inches (150 mm) if closer and latch are provided.
3. Beyond hinge side.
4. Add 6 inches (150 mm) if closer is provided.

Figure (a) Front approach, pull side. Maneuvering space on the pull side extends 18 inches (455 mm) minimum beyond the latch side of the door and 60 inches (1525 mm) minimum perpendicular to the doorway.
Figure (b) Front approach, push side. Maneuvering space on the push side of doors not equipped with a closer or latch is the same width as the door opening and extends 48 inches (1220 mm) minimum perpendicular to the doorway.
Figure (c) Front approach, push side, door with both closer and latch. Maneuvering space on the push side of doors equipped with both a closer and a latch extends 12 inches (305 mm) minimum beyond the latch side of the door and 48 inches (1220 mm) minimum perpendicular to the doorway.
Figure (d) Hinge approach, pull side. Maneuvering space on the pull side extends 36 inches (915 mm) minimum beyond the latch side of the door and 60 inches (1525 mm) minimum perpendicular to the doorway.
Figure (e) Hinge approach, pull side. Maneuvering space on the pull side extends 42 inches (1065 mm) minimum beyond the latch side of the door, it can extend 54 inches (1370 mm) minimum perpendicular to the doorway.
Figure (f) Hinge approach, push side. Maneuvering space on the push side extends 22 inches (560 mm) from the hinge side of the doorway and 42 inches (1065 mm) at doors that do not have both a closer and a latch.
Figure (g) Hinge approach, push side, door provided with both closer and latch. Maneuvering space on the push side extends 22 inches (560 mm) from the hinge side of the doorway and 48 inches (1220 mm) minimum perpendicular to the doorway at doors with both a closer and a latch.
Figure (h) Latch approach, pull side. Maneuvering space on the pull side extends 24 inches (915 mm) minimum beyond the latch side of the door and 48 inches (1220 mm) minimum measured perpendicular to the doorway where the door does not have both a closer and a latch.
Figure (i) Latch approach, pull side, door provided with closer. Maneuvering space on the pull side extends 24 inches (915 mm) minimum beyond the latch side of the door and 54 inches (1525 mm) minimum perpendicular to the doorway.
Figure (j) Latch approach, push side. Maneuvering space on the push side extends 24 inches (560 mm) from the latch side of the doorway and 42 inches (1065 mm) minimum measured perpendicular to the doorway if the door does not have both a closer and a latch.
Figure (k) Latch approach, push side, door provided with closer. Maneuvering space on the push side extends 24 inches (560 mm) from the latch side of the doorway and 48 inches (1220 mm) minimum perpendicular to the doorway if the door has both a closer and a latch.

Figure 404.2.4.1 Maneuvering Clearances at Manual Swinging Doors and Gates

Source: 2010 ADA Standards for Accessible Design Pocket Guide by Evan Terry Associates, LLC - published 05/05/2015

Previous Next

Related Keywords

Related Section Numbers

User Comments/Questions

Add Comment/Question

[MORE INFO...]

*You must sign in to view [MORE INFO...]