Product Description
A modern concept close coupled 1.6/0. 8gpf (6/3 l) Sydney Low Profile 270 Easy Height dual flush high efficiency toilet (HET) designed to provide a seat height of between 17" to 19" (430 to 485mm) measured to the top of the toilet seat. This tank is a low profile design for greater installation versatility which incorporates a high performance outlet valve that has been specially developed with the 270 Easy Height Round Front Plus bowl to ensure optimum reliable flushing performance. Important: The Sydney Low Profile 270 Easy Height dual flush washdown toilet will comply with the Americans with Disabilities Act when installed to Easy Height Standards for Accessible Design, Section 4.16 Water Closets. Further reference must be made to the relevant sections of Easy Height Standards For Accessible Design with current amendments to determine clear floor space, grab bar, and operation requirements. The dimensions in this sheet may change with amendments to the standards.
Closet bowl: 270 Easy Height Round Front Plus 1.6/0.8 gpf (6/3 l) full flush washdown closet bowl with open flushing rim
Outlet: Floor mounted suitable for connection to waste outlet with offset plastic outlet connector for 10" (255mm) to 12" (305mm) rough-in.
Tank: Sydney Low Profile Tank – has a free fitting lid and is suitable for domestic and light commercial applications. Vandal Resistant Conversion Kit – A simple to install conversion is available for the standard mechanism to lock lid onto the tank, recommended for use in heavy duty commercial areas. Code No. 750110. The dual flush operating buttons comply with the requirements of Easy Height Standards for Accessible Design.
Weight: 86 lbs (39 kg)
Water Control Valve: Standard Bottom Entry Tank – available as left hand inlet and incorporates a super quiet water control assembly. Internal overflow only
Fixing: The tank is fixed directly to the closet bowl with a robust base fixing system without the need for wall fixing.
Seats: The following Caroma seats are recommended: Detachable Code No. 301032, Easy Closing Code No. 326222, and Standard Code No. 326707.
Color: White
Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifications without notice.
Minimal height, maximum performance
-
High efficiency toilet (HET) - 1.6/0.8 gallons (6/3 liters) per flush
-
Two piece, two button dual flush toilet
-
Higher bowl: 17"
-
Total height: 28 3/4"
-
Large fully concealed trapway
-
Virtually unblockable
-
10-12" rough-in
Dimensions
-
29"L x 18 3/4"W x 28 3/4"H (bowl height = 17")
Product Details
CSI Division: | 22 42 13.13 |
---|---|
CSI Division Title: | Commercial Water Closets |
Product Cut Sheet/Specs/Demo: | http://www.caromausa.com/database/files/Sydney_Low_Profile_270_EH_RFP_tech_manual.pdf |
Related Keywords
Related Section Numbers
- 2010 ADA Standards for Accessible Design Pocket Guide, (4)
- 1991 ADA Standards for Accessible Design, (9)
- Uniform Federal Accessibility Standards (UFAS), (1)
- 2012 Florida Accessibility Code for Building Construction Pocket Guide, (4)
- 2013 California Standards for Accessible Design Pocket Guide, (4)
- ADAAG Manual, (3)
- Guidance on the 2010 ADA Standards for Accessible Design, (1)
- 36 CFR Parts 1190 and 1191 ADA and ABA Accessibility Guidelines - Preamble (Discussion of Comments and Changes), (2)
- ABA Accessibility Standard for GSA Facilities Pocket Guide, (4)
Caroma® USA Sydney Low Profile 270 Easy Height Round Front Plus Toilet
View: | 3D object |
---|---|
File type: | rfa |
Caroma® USA Sydney Low Profile 270 Easy Height Round Front Plus Toilet Side Elevation
View: | 2D: side elevation |
---|---|
File type: | dwg |
Caroma® USA Sydney Low Profile 270 Easy Height Round Front Plus Toilet Plan
View: | 2D: plan view |
---|---|
File type: | dwg |
Caroma® USA Sydney Low Profile 270 Easy Height Round Front Plus Toilet Front Elevation
View: | 2D: front elevation |
---|---|
File type: | dwg |