Product Description
The Dyson digital motor V4 was seven years in the making - it's one of the world's smallest fully-integrated 1400W motors. It's the only hand dryer motor powerful enough to draw in 28 liters of air per second through a HEPA filter, and then dry hands in 14 seconds.
This long-life, energy-efficient motor is digitally switched at 6,100 times per second, making the high compression fan spin 92,000 times a minute. There are only three moving parts, so there are no slip rings or carbon brushes to wear down.
14 second dry time
The conventional way to wash and dry hands is too slow. Hand drying facilities are often not located near a sink, and dryers can take up to 43 seconds, so people can give up. But damp hands can spread up to 1,000 times more bacteria than dry hands.
There's no need to leave the sink to use the Dyson AirbladeTM Tap hand dryer and it dries hands in 14 seconds.
The most hygienic hand dryer
Most other hand dryers are unhygienic. They don't filter bacteria from the restroom air. They suck in dirty air then blow it back onto hands. The Dyson AirbladeTM Tap hand dryer uses a HEPA filter removing 99.97% of bacteria at 0.3 microns from the air used to dry hands. So hands are dried using cleaner air, not dirty air.
Lowest operating costs
Most other hand drying methods are expensive to run. Paper towels need restocking and disposal. Most other hand dryers are slow, and many use a heating element, so they're energy-hungry.
The Dyson AirbladeTM Tap hand dryer costs up to 69% less to run per year than other hand dryers, and up to 97% less than paper towels. And of course there are no separate taps to buy.
Touch-free operation
Both water and air are sensor operated so there are no taps to turn, or buttons to touch. Intelligent, infrared sensors emit light to pinpoint hand positions. Computer circuitry coordinates the information and initiates the appropriate response of water or air without long delays.
Saves water
Controlled water flow rate and sensor operation can help save water.
Quick to clean
Smooth, stainless steel outer, wipes down directly over the sink - no separate hand dryers to clean.
5 year warranty
The Dyson AirbladeTM Tap hand dryer comes with a 5 year parts and 5 year limited labor warranty.
Product Details
CSI Division: | 10 28 13.13 |
---|---|
CSI Division Title: | Commercial Toilet Accessories |
Manufacturer's Brochure: | http://viewer.zmags.com/publication/857e8f6e#/857e8f6e/1 |
Product Cut Sheet/Specs/Demo: | http://airblade.dyson.com/medialibrary/Files/Tech%20Specs/Tap_TECHSPEC_US.pdf |
Related Keywords
Related Section Numbers
- 2010 ADA Standards for Accessible Design Pocket Guide, (5)
- 1991 ADA Standards for Accessible Design, (6)
- Uniform Federal Accessibility Standards (UFAS), (2)
- 2012 Florida Accessibility Code for Building Construction Pocket Guide, (6)
- 2012 Texas Accessibility Standards (TAS) Pocket Guide, (5)
- 2016 California Standards for Accessible Design Pocket Guide - Eff. Jan. 1, 2017, (8)
- 2013 California Standards for Accessible Design Pocket Guide, (8)
- ADAAG Manual, (3)
- Guidance on the 2010 ADA Standards for Accessible Design, (1)
- 36 CFR Part 1191 ADA and ABA Accessibility Guidelines for Emergency Transportable Housing Units, (1)
- ADA/Section 504 Design Guide - Accessible Cells in Correction Facilities, (1)
- ABA Accessibility Standard for GSA Facilities Pocket Guide, (5)
- 2013 Forest Service Outdoor Recreation Accessibility Guidelines (FSORAG), (1)
- z(UNPUBLISHED) 2013 California Standards for Accessible Design (excerpts relating to Safe Harbors only), (1)
- DSA Summary of 2016 California Building Code Changes for Accessibility, (1)
Dyson Airblade Tap Touch-free Faucet and Hand Dryer Revit Model
View: | 3D object |
---|---|
File type: | rfa |
Dyson Airblade Tap Touch-free Faucet and Hand Dryer Front Elevation
View: | 2D: front elevation |
---|---|
File type: | dwg |
Dyson Airblade Tap Touch-free Faucet and Hand Dryer Side Elevation
View: | 2D: side elevation |
---|---|
File type: | dwg |
Dyson Airblade Tap Touch-free Faucet and Hand Dryer Plan
View: | 2D: plan view |
---|---|
File type: | dwg |