Product Description
Series Overview
Model WXT and WXTH Picnic Tables are ADA Compliant and accessible to wheelchairs at both ends. These tables are designed and constructed specifically for heavy use areas where unusually difficult service may be required. Now, EVERY picnic table in your facility can be fully accessible!
Specifications:
Model WXT and WXTH Picnic Tables utilize a patented innovative design evolution of our popular XT Series Park Tables. They are ADA COMPLIANT and accessible to wheelchairs at both ends—they meet or exceed current ADA guidelines for wheelchair access to picnic tables. Full length seats offer full capacity seating which is an advantage over extended top or side access tables. The unique frame design includes two wheelchair spaces plus provides proper support under the outside ends of the full length seats.
The exclusive patented transverse frame leg under the seat makes this a very stable table. The portable design gives you placement flexibility.
The WXT Series offers clearances under the table top of 30” wide, 27” high, and 24” total knee and toe clearance (19” knee and 5” toe). Nominal seat height is 18”.
The WXTH Series offers clearances under the table top of 30” wide, 31” high and 24” total knee and toe clearance (19” knee and 5” toe). Nominal seat height is 19”. The raised table top allows most wheelchair armrests to fit under it for a closer approach which is an advantage for some persons in wheelchairs and persons with certain physical restrictions.
FRAME: All welded 2-3/8” OD steel pipe (2.375 OD, 11 ga. Wall, 2” ID nom. pipe specifications). Top/seat mounting angles are 2” x 2” x 3/16” steel angles. Frames supported by diagonal braces of 1-5/16” OD steel pipe attached to center channel. Frames are welded into a single piece structure for strength and easy assembly. All 3/8” dia. Galvanized carriage bolt fasteners. Warranted for Life.
FINISH: Standard finish: hot dip galvanized after fabrication. Or choose a powder coat finish (in place of galvanized finish) in your choice of color.
LENGTH: 6, 8, 10 or 12 ft. long.
TOP/SEAT MATERIAL: 2” X 10” (nom.) aluminum planks, top is pre-assembled at the factory. Note: The 6 ft table has nominally shorter seats. Aluminum is available with clear anodized finish or in your color choice of powder coat paint finish. See Material Options.
OPTIONAL: To anchor table to a concrete surface, use Model ANC6-4 Anchor Kit (Concrete Screws) and Model ANG-3 Anchor Kit (Anchor Straps).
Product Details
CSI Division: | 32 33 43 |
---|---|
CSI Division Title: | Site Seating and Tables |
Product Cut Sheet/Specs/Demo: | http://www.pilotrock.com/userdocs/specs/WXT6,8AL.pdf / http://www.pilotrock.com/userdocs/specs/WXTH6,8AL.pdf |
Related Keywords
Related Section Numbers
- 2010 ADA Standards for Accessible Design Pocket Guide, (2)
- 1991 ADA Standards for Accessible Design, (3)
- Uniform Federal Accessibility Standards (UFAS), (2)
- 2012 Florida Accessibility Code for Building Construction Pocket Guide, (2)
- 2012 Texas Accessibility Standards (TAS) Pocket Guide, (2)
- 2016 California Standards for Accessible Design Pocket Guide - Eff. Jan. 1, 2017, (2)
- 2013 California Standards for Accessible Design Pocket Guide, (2)
- ADAAG Manual, (4)
- Guidance on the 2010 ADA Standards for Accessible Design, (1)
- 36 CFR Part 1191 ABA Accessibility Guidelines, Outdoor Developed Areas - Preamble, (2)
- 36 CFR Part 1191 ABA Accessibility Guidelines, Outdoor Developed Areas, (3)
- Title III Technical Assistance Manual (with 1994 supplement), (1)
- ABA Accessibility Standard for GSA Facilities Pocket Guide, (5)
- 2013 Forest Service Outdoor Recreation Accessibility Guidelines (FSORAG), (3)
- Accessibility Guidebook for Outdoor Recreation and Trails, (2)
- Accessible Picnic Table Designs for Accessible Recreation Facilities, (1)
- Outdoor Developed Areas: A Summary of Accessibility Standards for Federal Outdoor Developed Areas, (3)