Pilot Rock XT and XTH Series End Accessible Picnic Table - Using Steel Tops and Seats
Product Description
Series Overview
Model XT and XTH End Accessible Picnic Tables are designed and constructed specifically for heavy use areas where unusually difficult service may be required. Table tops can be extended on one or both ends for ADA COMPLIANT [sic].
Specifications:
Model XT and XTH End Accessible Picnic Tables feature our non-tip, non-trip, walk through design. The table won’t tip even if all persons sit on one side. Easy walk through access. “Skid” design permits movement without damage to turf. Table tops can be extended 2 ft. beyond the seats on one or both ends. The extended top is supported by a special diagonal brace and steel channel. This table configuration meets or exceeds current ADA guidelines for wheelchair access to picnic tables.
Model XT End Access Picnic Tables offer 30” nom. table height (to top of table); 18” nom. seat height.
Model XTH End Access Picnic Tables offer 30” under table clearance to allow most wheelchair armrests to fit under it for a closer approach; 18” nom. seat height.
FRAME: All welded 2-3/8" OD steel pipe end frames (2.375" OD, 11 ga. wall, 2" ID nom. pipe specifications). Top/seat mounting angles are 2" x 2" x 3/16" steel angles. Frames supported by diagonal braces of 1-5/16" OD steel pipe attached to steel center channel. Extended top is supported by an additional diagonal brace and steel channel. All 3/8" dia. galvanized carriage bolt fasteners. Warranted for life.
FINISH: Standard finish: hot dip galvanized after fabrication. Or choose a powder coat finish (in place of galvanized finish) in your color choice.
LENGTH: 6 ft. seats with 8 ft. top (extended on one end).
TOP/SEAT MATERIALS: Our D-Type 3/4-#9 expanded steel OR our R-Type 14 ga. perforated steel OR 2" x 4" formed steel channels assembled into seat planks and top. Steel seat/top components will be thermo-plastic coated in your choice of color. See Material Options.
OPTIONAL: To anchor table to a concrete surface, use Model ANC6-4 Anchor Kit (Concrete Screws) and Model ANG-3 Anchor Kit (Anchor Straps).
Product Details
| CSI Division: | 32 33 43 |
|---|---|
| CSI Division Title: | Site Seating and Tables |
| Product Cut Sheet/Specs/Demo: | http://www.pilotrock.com/userdocs/specs/XTHE-6-EXP-D.pdf |
Related Keywords
Related Section Numbers
- 2010 ADA Standards for Accessible Design Pocket Guide, (2)
- 1991 ADA Standards for Accessible Design, (3)
- Uniform Federal Accessibility Standards (UFAS), (2)
- 2012 Florida Accessibility Code for Building Construction Pocket Guide, (2)
- 2012 Texas Accessibility Standards (TAS) Pocket Guide, (2)
- 2016 California Standards for Accessible Design Pocket Guide - Eff. Jan. 1, 2017, (2)
- 2013 California Standards for Accessible Design Pocket Guide, (2)
- ADAAG Manual, (4)
- Guidance on the 2010 ADA Standards for Accessible Design, (1)
- 36 CFR Part 1191 ABA Accessibility Guidelines, Outdoor Developed Areas - Preamble, (2)
- 36 CFR Part 1191 ABA Accessibility Guidelines, Outdoor Developed Areas, (3)
- Title III Technical Assistance Manual (with 1994 supplement), (1)
- ABA Accessibility Standard for GSA Facilities Pocket Guide, (5)
- 2013 Forest Service Outdoor Recreation Accessibility Guidelines (FSORAG), (3)
- Accessibility Guidebook for Outdoor Recreation and Trails, (2)
- Accessible Picnic Table Designs for Accessible Recreation Facilities, (1)
- Outdoor Developed Areas: A Summary of Accessibility Standards for Federal Outdoor Developed Areas, (3)
Pilot Rock Picnic Table Demo (03:21)
Comparison of Pilot Rock Picnic Table with steel top and seats vs. a competitor's copy. Watch a demonstration of how easily the competitor's table is vandalized while the Pilot Rock picnic table withstands the abuse. See all the different Pilot Rock picnic tables, standard and accessible, at...