Product Description
Series Overview
Model XT Side Accessible Picnic Tables are designed and constructed specifically for heavy use areas where unusually difficult service may be required. A section of seating is removed from the side(s) for ADA COMPLIANT wheelchair accessibility right in the middle of activities. Table configurations meet or exceed current ADA guidelines for wheelchair access to picnic tables.
Specifications:
Model XT Side Accessible Picnic Tables feature our non-tip, non-trip, walk through design. The table won’t tip even if all persons sit on one side. Easy walk through access. “Skid” design permits movement without damage to turf.
Model XT 6 and 8 ft. Side Access Picnic Tables provide one side opening with 2 one-person seats located on either side of wheelchair. These tables can comfortably seat 6-7 people.
Model XT 10 and 12 ft. Side Access Picnic Tables provide two locations for wheelchairs which are diagonally opposite each other. Current ADA guidelines require two wheelchair spaces on these larger tables. Each side includes a shorter one-person seat plus a longer seat to accommodate 3-4 people. These tables can comfortably seat 10-12 people.
Model UT Side Accessible Tables offer 30” nom. table height (to top of table); 18” nom. seat height. Diagonal braces are used to support and reinforce the table structure. Brace positioning allows wheelchair spaces to meet current ADA clearance guidelines of 30" wide, 27" under table (ground to bottom of table top), and 24" total knee and toe clearances (19" knee + 5" toe).
FRAME: All welded 2-3/8" OD steel pipe end frames (2.375" OD, 11 ga. wall, 2" ID nom. pipe specifications). Top/seat mounting angles are 2" x 2" x 3/16" steel angles. Frames supported by diagonal braces of 1-5/16" OD steel pipe attached to steel center channel. All 3/8" dia. galvanized carriage bolt fasteners. Warranted for life.
FINISH: Standard finish: hot dip galvanized after fabrication. Or choose a powder coat finish (in place of galvanized finish) in your color choice.
LENGTH: 6, 8, 10 or 12 ft lengths.
TOP/SEAT MATERIALS: 2” X 10” (nom.) aluminum planks, top is pre-assembled at the factory. Aluminum is available with clear anodized finish or in your color choice of powder coat paint finish. See Material Options.
OPTIONAL: To anchor table to a concrete surface, use Model ANC6-4 Anchor Kit (Concrete Screws) and Model ANG-3 Anchor Kit (Anchor Straps).
Product Details
CSI Division: | 32 33 43 |
---|---|
CSI Division Title: | Site Seating and Tables |
Product Cut Sheet/Specs/Demo: | http://www.pilotrock.com/userdocs/specs/XT-6,8-SA-ALUM.pdf |
Related Keywords
Related Section Numbers
- 2010 ADA Standards for Accessible Design Pocket Guide, (2)
- 1991 ADA Standards for Accessible Design, (3)
- Uniform Federal Accessibility Standards (UFAS), (2)
- 2012 Florida Accessibility Code for Building Construction Pocket Guide, (2)
- 2012 Texas Accessibility Standards (TAS) Pocket Guide, (2)
- 2016 California Standards for Accessible Design Pocket Guide - Eff. Jan. 1, 2017, (2)
- 2013 California Standards for Accessible Design Pocket Guide, (2)
- ADAAG Manual, (4)
- Guidance on the 2010 ADA Standards for Accessible Design, (1)
- 36 CFR Part 1191 ABA Accessibility Guidelines, Outdoor Developed Areas - Preamble, (2)
- 36 CFR Part 1191 ABA Accessibility Guidelines, Outdoor Developed Areas, (3)
- Title III Technical Assistance Manual (with 1994 supplement), (1)
- ABA Accessibility Standard for GSA Facilities Pocket Guide, (5)
- 2013 Forest Service Outdoor Recreation Accessibility Guidelines (FSORAG), (3)
- Accessibility Guidebook for Outdoor Recreation and Trails, (2)
- Accessible Picnic Table Designs for Accessible Recreation Facilities, (1)
- Outdoor Developed Areas: A Summary of Accessibility Standards for Federal Outdoor Developed Areas, (3)