Sloan WETS 2050.1001-1.28 Manual HET Flushometer and HET Wall Hung Water Closet

Complete HET system with exposed manual Royal(R) Flushometer and vitreous china wall hung fixture. Designed to meet ADA standards when bowl is 17" - 19" high including seat. Meets the American Disabilities Guidelines and ANSI A117.1 requirements when installed according to these requirements. ADA compliant metal oscillating Non-Hold-Open Handle with Triple Seal Handle Packing.

FLUSH CYCLE:

Model WETS-2050.1001-1.28 (1.28 gpf/4.8 Lpf)Code:20501001

SPECIFICATIONS:

Quiet, exposed, diaphragm type, chrome plated HET Flushometer and vitreous china water closet with the following features:

Flushometer PERMEX(R) Synthetic Rubber Diaphragm with Dual Filtered Fixed Bypass

ADA compliant metal oscillating Non-Hold-Open Handle with Triple Seal Handle Packing

1" I.P.S. Screwdriver Bak-Chek(R) Angle Stop

Free spinning Vandal Resistant Stop Cap

Adjustable Tailpiece

High Back Pressure Vacuum Breaker Flush Connection with One-piece Bottom Hex Coupling Nut

Spud Coupling and Flange for 1-1/2" Top Spud

Sweat Solder Adapter with Cover Tube and Cast Wall Flange with Set Screw

High copper, low zinc brass castings for dezincification resistance

Non-Hold-Open Handle, Fixed Metering Bypass and no external volume adjustment to ensure water conservation

Flush accuracy controlled by CID(R) technology

Diaphragm, Handle Packing, Stop Seat and Vacuum Breaker molded from PERMEX(R) rubber compound for chloramine resistance

Valve Body, Cover, Tailpiece and Control Stop shall be in conformance with ASTM Alloy Classification for Semi-Red Brass. Valve shall be in compliance to the applicable sections of ASSE 1037.

FEATURES:

Wall hung vitreous china elongated bowl

Siphon jet flushing action

1-1/2" I.P.S. top spud inlet

21/8" fully glazed trapway diameter

Integral flushing rim

Water spot area 9 1/28 x 8 1/48

Mounting hardware, carrier and toilet seat not included

Compatible with toilet seat models: Bemis 1955CT, Bemis 2155CT

Water closet shall be in compliance to the applicable sections of ASME A112.19.2/CSA B45.1

Compliant with Buy American Act when purchased as a combination

NOTE: All vitreous china dimensions shown in these drawings are nominal. Dimensions can vary within the tolerances established in the governing ASME A112.19.2/CSA B45.1 standard. Please take this into consideration when planning rough-in and plumbing layouts.