Willoughby Industries ETW-1445-BS-HC Toilet for 45-degree Chase Wall

450 chase, wall outlet, blowout toilet shall be: Willoughby Model No. ETW-1445-___...-BS-HC. Fixture shall be fabricated from 14 gauge, type 304 stainless steel.

The construction shall be all welded, with exposed stainless surfaces polished to a #4 satin finish. Standard toilet shall include:

Elongated toilet bowl with contoured seat - Integral crevice-free self-draining flushing rim with positive after fill - Fully enclosed 2 1/2” O.D. trap which shall maintain a minimum 2" seal and pass a 2 1/8” ball - Bead blast finish bowl interior Toilet shall be blowout type, requiring 35 psi min. flushing pressure.

Model shall meet the requirements of ASME A112.19.3/CSA B45.4. Fixture shall withstand loadings up to 2,000 lbs. with no measurable deflection and loadings up to 5,000 lbs. with no permanent damage. Anchoring shall be by standard 4-point system: threaded rods, nuts and washers shall be furnished for walls up to 8" thick. Floor anchoring by others. Unit shall require chase area for installation and maintenance.

On back to back fixture installations, do not use standard cross type waste fitting: cross flow may result due to blowout jet action. Use sanitary or offset type waste fittings.

Note: for HET 1.28 GPF, unit will pass a 2" ball.