Willoughby Industries ETW-1490-FM-HC Floor Mounted Blowout Series Water Closet

Willoughby Model No. ETW-1490-FM-HC

Fixture shall be fabricated from 14 gauge, type 304 stainless steel. The construction shall be all welded, with exposed stainless surfaces polished to a #4 satin finish.

Standard toilet shall include: - Elongated toilet bowl with contoured seat - Integral crevice-free self-draining flushing rim with positive after fill - Fully enclosed 2 1/2” O.D. trap which shall maintain a minimum 2" seal and pass a 2 1/8” ball - Bead blast finish bowl interior Toilet shall be blowout type, requiring 35 psi min. flushing pressure. Use "HC" Suffix for 18" A.F.F. Seat Height.

Model shall meet the requirements of ASME A112.19.3/CSA B45.4.Fixture shall withstand loadings of 5,000 lbs. without permanent damage. Anchoring shall be by standard 6-point system (4 in the wall and 2 in the floor): threaded rods, nuts and washers shall be furnished for walls up to 8" thick. Floor anchoring by others. Unit shall require chase area for installation and maintenance.

On back to back fixture installations, do not use standard cross type waste fitting: cross flow may result due to blowout jet action. Use sanitary or offset type waste fittings.

Note: for HET 1.28 GPF, unit will pass a 2" ball.