Willoughby Industries WBL-2320 Ligature-resistant Behavioral Healthcare Lavatory System
Product Description
WBL-2320 Ligature resistant, solid surface, behavioral health, lavatory system
Wall-hung fixture shall accommodate one user and is designed to minimize ligature points. The lavatory system bowl with integral sloped backsplash is constructed of Aquasurf® molded cast polymer densified solid surface material composed of polyester/acrylic resin, UV stabilizer, aluminum tri-hydrate and mineral fillers. Lavatory bowl shall be rounded to minimize its use as a ligature point. The pre-assembled lavatory spray head shall be machined of stainless steel and shall be controlled by a pushbutton or infrared sensor. Lavatory spray head shall provide non-aerated water stream. Exposed stainless steel surfaces shall be polished to a #4 satin finish and shall be fully-rounded to minimize use as a ligature point. Pushbutton shall be machined of stainless steel and shall be fully rounded to minimize use as a ligature point. Flow restrictor shall maintain flow rates at 0.5 GPM.WBL-2320 Lavatory Systems shall be supplied with drain tailpiece, integral check stops, drain spuds, flexible supply hoses, control valves, Class II 120/24 VAC plug-in transformers*. Single temperature control valves shall be furnished with thermostatic mixing valve. Operating supply water pressure range is 30-75 psi. Pedestal shall be welded stainless steel with solid polymer side panels to correspond to solid surface lavatory bowl. Trap cover shall be one piece formed stainless steel and attached with stainless steel security screws.
Vandal Resistance/Safety Features:
The spray head, pushbuttons, infrared sensor, drain and ecutcheon are non-removable and are designed to minimize ligature points. Valve, water supplies and waste connection are concealed within trap enclosure. All exposed fasteners shall be vandal-resistant security type screws. The Aquasurf® solid surface material is resistant to stains, impact and burns. Surface damage can be easily repaired with everyday cleansers and/or fine grit abrasives.
ADA,TAS,UFAS and ANSI Compliant:
When the lavatory is mounted at the standard adult rim height it is designed to comply with all applicable ADA,TAS,UFAS and ANSI Z124.3 and Z124.6 accessibility guidelines.
Optional Features:
* Note: Plug-in transformer must be used with a ground fault interrupter (GFCI) receptacle to prevent possible electrical shock. (Not required on PML valves)
Product Details
CSI Division: | 22 42 16 |
---|---|
CSI Division Title: | Commercial Lavatories and Sinks |
Product Cut Sheet/Specs/Demo: | http://www.willoughby-ind.com/PRODUCTS/LigatureResistant.aspx |
Related Keywords
Related Section Numbers
- 2010 ADA Standards for Accessible Design Pocket Guide, (3)
- 1991 ADA Standards for Accessible Design, (6)
- Uniform Federal Accessibility Standards (UFAS), (2)
- 2012 Florida Accessibility Code for Building Construction Pocket Guide, (4)
- 2012 Texas Accessibility Standards (TAS) Pocket Guide, (3)
- 2016 California Standards for Accessible Design Pocket Guide - Eff. Jan. 1, 2017, (6)
- 2013 California Standards for Accessible Design Pocket Guide, (6)
- ADAAG Manual, (3)
- Guidance on the 2010 ADA Standards for Accessible Design, (1)
- 36 CFR Part 1191 ADA and ABA Accessibility Guidelines for Emergency Transportable Housing Units, (1)
- ADA/Section 504 Design Guide - Accessible Cells in Correction Facilities, (2)
- ABA Accessibility Standard for GSA Facilities Pocket Guide, (3)
- z(UNPUBLISHED) 2013 California Standards for Accessible Design (excerpts relating to Safe Harbors only), (1)
Willoughby Industries WBL-2320 Ligature-resistant Behavioral Healthcare Lavatory System
View: | 3D object |
---|---|
File type: | rfa |