11B-503.3 Access aisle

Note: This document or portion of document references a state or local code that aligns with the 2010 ADA Standards requirements.

11B-503.3 Access aisle.

Passenger drop-off and loading zones shall provide access aisles complying with Section 11B-503 adjacent and parallel to the vehicle pull-up space. Access aisles shall adjoin an accessible route and shall not overlap the vehicular way.

11B-503.3.1 Width.

Access aisles serving vehicle pull-up spaces shall be 60 inches (1524 mm) wide minimum.

11B-503.3.2 Length.

Access aisles shall extend the full length of the vehicle pull-up spaces they serve.

Access aisles shall be marked with a painted borderline around their perimeter. The area within the borderlines shall be marked with hatched lines a maximum of 36 inches (914 mm) on center in a color contrasting with that of the aisle surface.

[2010 ADA Standards] 503.3.3 Marking. Access aisles shall be marked so as to discourage parking in them.

An access aisle at a passenger loading zone is shown to be the full length of the vehicle pull-up space and 60 inches wide minimum. The access aisle is marked with a borderline and hatched lines within the border.

FIGURE 11B-503.3 PASSENGER DROP-OFF AND LOADING ZONE ACCESS AISLE ‡‡

[MORE INFO...]

*You must sign in to view [MORE INFO...]

Solutions

Documents

Resources

2022 California Standards for Accessible Design Guide (effective January 1, 2023)