2022 California Standards for Accessible Design Guide (effective January 1, 2023)
11B-503 Passenger drop-off and loading zones
[2010 ADA Standards] 503 Passenger Loading Zones
11B-503.1 General.
Passenger drop-off and loading zones shall comply with Section 11B-503.
11B-503.2 Vehicle pull-up space.
Passenger drop-off and loading zones shall provide a vehicular pull-up space 96 inches (2438 mm) wide minimum and 20 feet (6096 mm) long minimum.
11B-503.3 Access aisle.
Passenger drop-off and loading zones shall provide access aisles complying with Section 11B-503 adjacent and parallel to the vehicle pull-up space. Access aisles shall adjoin an accessible route and shall not overlap the vehicular way.
11B-503.3.1 Width.
Access aisles serving vehicle pull-up spaces shall be 60 inches (1524 mm) wide minimum.
11B-503.3.2 Length.
Access aisles shall extend the full length of the vehicle pull-up spaces they serve.
11B-503.3.3 Marking.
Access aisles shall be marked with a painted borderline around their perimeter. The area within the borderlines shall be marked with hatched lines a maximum of 36 inches (914 mm) on center in a color contrasting with that of the aisle surface.
[2010 ADA Standards] 503.3.3 Marking. Access aisles shall be marked so as to discourage parking in them.
11B-503.4 Floor and ground surfaces.
Vehicle pull-up spaces and access aisles serving them shall comply with Section 11B-302. Access aisles shall be at the same level as the vehicle pull-up space they serve. Changes in level, slopes exceeding 1:48, and detectable warnings shall not be permitted.
Exception: Reserved.
11B-503.5 Vertical clearance.
Vehicle pull-up spaces, access aisles serving them, and a vehicular route from an entrance to the passenger loading zone and from the passenger loading zone to a vehicular exit shall provide a vertical clearance of 114 inches (2896 mm) minimum.
User Comments/Questions
Add Comment/Question